Solid control series

Solid control series

The Mortec 3-10 sand remover can remove approximately 95% of rock debris larger than 74m and approximately 50% of rock debris larger than 40m under normal operation. CS2-10, The vertical installation type sand remover consists of three 10 inch cyclones installed vertically on the bottom pry. Each cyclone is connected by four replaceable wear-resistant polyurethane components through stainless steel clamps.

The MTK-CS series desander can remove approximately 95% of rock debris larger than 74 μ m and approximately 50% of rock debris larger than 40 μ m under normal operation.

Features and advantages:

The sand removal cyclone is made of polyurethane or high chromium cast iron, with a long service life.

Clamp type, easy to maintain

Compact design with small footprint

According to different processing capacities, 1, 2, or 3 10 "or 12" sand removal cyclones can be flexibly selected

Users can connect quickly and flexibly during assembly


Technical parameters:

model

MTK-CS300×2/1

MTK-CS 250×2/1

MTK-CS 200×2/1

Cyclone diametermm

300

250

200

Working pressureMPa

0.25～0.4

0.25～0.4

0.25～0.4

Processing capacitym3/h

240 / 120

220 / 110

160 / 80

Screen sizemm

1240*585

1240*585

1240*585

Screen specifications

120-200 eye

120-200 eye

120-200 eye

Inlet sizemm

DN150

DN150

DN125

Size of slurry outletmm

DN200

DN200

DN150

Motor PowerkW

0.5

0.5

0.5

qualitykg

788 / 689

750 / 660

720 / 640

External dimensionsmm

1630*1420*2320

1630*1420*2320

1630*1420*2320

 

If you have any questions or support, please fill in the following information and we will reply to you as soon as possible!!